Pool Pump Repair Cost
Most pool pump repairs cost $150–$600 including the service call. The specific fault, not the brand of pump, is what determines where in that range you land.
Typical national range
$150–$600
Common single-fault pump repairs including a service call — capacitor, seal, or basic motor work. Full motor replacement and multi-fault cases run higher.
What this project needs measured
Measurements are only requested when they change the price of the work you selected. Everything below is collected inside the estimator — you can enter dimensions you already know or measure as you go.
Required
No measurement required
This project is diagnosed from symptoms and equipment details rather than dimensions.
Cost by fault
| Fault | Cost |
|---|---|
| Blocked basket or air leak (found on inspection) | $100–$250 |
| Failed capacitor | $150–$350 |
| Failed mechanical seal | $200–$450 |
| Failed bearings | $250–$600 |
| Motor replacement (existing wet end) | $300–$700 |
| Electrical fault diagnosis and repair | $200–$600 |
| Full pump replacement | $900–$1,900 installed |
When repair quotes point toward replacement
Repair and replacement are not really competing on the same axis, because replacement also buys variable-speed efficiency that most older pumps lack.
| Situation | Better value |
|---|---|
| Under 5 years old, simple fault | Repair |
| 5–8 years old, seal or capacitor | Repair |
| Over 8 years old, motor fault | Replace |
| Any age, single-speed, major fault | Replace |
| Repair quote over ~$500 | Compare directly against replacement |
How to read a PoolSavr estimate
- Step 1
Instant estimate
Based on your project selections and general pricing assumptions. Useful for deciding whether a project is realistic.
- Step 2
Measured estimate
Uses your pool, spa, or deck dimensions to price the work against the areas actually being resurfaced, tiled, or replaced.
- Step 3
Contractor proposal
Prepared by a licensed professional after inspecting the site. This is the only number that becomes a contract.
PoolSavr is an estimating and matching platform. We do not perform pool work ourselves — licensed local professionals do. Contractors pay PoolSavr for qualified project leads, which is how the estimating tools stay free for homeowners. A PoolSavr estimate is a planning range, never a guaranteed quote — read thefull estimate disclaimer.
Frequently asked questions
- How much does pool pump repair typically cost?
- Most single-fault repairs run $150–$600 including the service call. A blocked basket or simple air leak can be under $150; bearing or motor work sits toward the top of that range.
- Is it worth repairing an old pump?
- Depends on age and fault. Under about eight years with a discrete fault like a seal or capacitor, yes. Over that, especially for motor work on a single-speed pump, replacement usually wins on both cost and running efficiency.
- Does the service call cost extra?
- The figures here include a standard service call. Emergency or same-day visits, and calls outside normal hours, typically cost more.
Ready to see what your project costs?
Start with the work you are considering. You will get a preliminary range before anyone asks for your phone number, and you decide whether to request a contractor review at the end.